The AW692 is a highly integrated Wi-Fi 6 device enabling concurrent dual Wi-Fi (CDW) and Bluetooth 5.3
operation. AW692 supports four modes:
- Mode 1: CDW 2x2 Wi-Fi 6 5 GHz (802.11ax) + 1x1 Wi-Fi 6 2.4 GHz (802.11ax)
- Mode 2: CDW 1x1 Wi-Fi 6 5 GHz (802.11ax) + 1x1 Wi-Fi 6 2.4 GHz (802.11ax)
- Mode 3: 2x2 Wi-Fi 6 2.4 GHz (802.11ax)
- Mode 4: 2x2 Wi-Fi 6 5 GHz (802.11ax)
The System-on-Chip (SoC) implements advanced features including MU-MIMO, OFDMA, Target Wake Time
(TWT), and Bluetooth LE Audio. With integrated 2.4 GHz and 5 GHz TX power amplifiers (PA), RX low noise amplifiers (LNA) and Tx/Rx
switches (T/R SW) as well as a full Bluetooth radio, the AW692 simplifies design. External front-end module
(FEM) with PA and LNA is also supported.
The AW692 supports a flexible front-end design with either two or three antennas.
The AW692 implements advanced real-time Wi-Fi and Bluetooth arbitration hardware in conjunction with
software algorithms to optimize coexistence performance.
NXP's Edgelock technology is integrated. The embedded Edgelock® secure subsystem (ELS) supports
hardware crypto accelerated secure boot, key management, firmware authentication, secure life cycle
management, and anti-rollback protection.
The AW692 integrates dedicated CPUs and memories for both the Wi-Fi and Bluetooth subsystems for real
time, independent protocol processing.
The interfaces to external host processors include PCIe for Wi-Fi and UART for Bluetooth.
The AW692 is available in HVQFN148 package, and complies with AEC-Q100 Grade 2.
The data sheet is available under NDA in the Documentation section of this page.